 
                 
            
         
                                         
                                             
                                             
                                             
                                            | Raw MaterialsAluminum base material: high strength aluminum alloy sheet Core: non-toxic low-density polyethylene(LDPE) core Surface: Polyester coating |  | 
| Width | 1220mm, 1250mm, 1500mm | 
| Length | Any size, recommend 2440mm, 3050mm, 4050mm | 
| Panel Thickness | 2mm~ 6mm, recommend 3mm | 
| Alu.Skin Thickness | 0.10mm~0.50mm, recommend 0.15mm,0.21mm,0.30mm | 
| Standard Size | 1220mm x 2440mm (4' x 8'); 1500mm x 3050mm (5' x 10') | 
| Colors | Factory’s standard 45 colors for reference | 
| Others | Accept custom size and colors too | 
| Thickness | ±0.20 mm | 
| Aluminum thickness | ±0.02 mm | 
| Width | ±2.0 mm | 
| Length | ±3.0 mm | 
| Diagonal | ±5.0 mm | 
| Thermal Expansion | 2.40 mm/m@100℃Temp difference | 
| Pencil Hardness | > HB | 
| Temperature Resistance | -40℃~80℃ | 
| Impact Strength | 50 kg cm2 | 
| Boiling Water Resistance | Boiling for 2 hours without change | 
| Acid Resistance | Immerse surface in 5% HCl for 24 hours without change | 
| Alkali Resistance | Immerse surface in 5% NaOH for 24 hours without change | 
| Oil Resistance | Immerse surface in 20# engine oil for 24 hours without change | 
| Solvent Resistance | Cleaned 100 times with Dimethylbenzene without change | 
| Cleaning Resistance | >1000 times without change | 
| Peel strength 180° | >5 N/mm | 
| Cold Resistance | -40℃ |